If you have just opened the box of the HQD Glow Air
70K, the device might look a little unfamiliar at first. There are pods, refill
containers, and a few pieces that need to be connected before you can start
using it. For someone new to pod devices, that can feel slightly confusing.
The good thing is that the setup is actually very
simple. Once everything is connected, the device works automatically when you
inhale. There are no complicated settings and nothing technical to figure out.
After the first setup, using the device becomes second nature. This guide walks
you through how to prepare the HQD Glow Air 70K Pods and start using the device
properly, just like someone would explain it in a vape shop.
Take Everything Out of the Box
Start by taking the device and pods out of the
packaging and laying them out in front of you. You will usually find the main
device along with pods and refill containers that hold the liquid. Before
assembling anything, take a quick look at the pods. You may notice small
silicone caps or protective seals placed on the mouthpiece or connection
points. These are only there to keep the pods sealed during shipping. Simply
remove them so the airflow and liquid system are open. It only takes a moment,
but this step is important because the device will not work properly if those
seals are left in place.
Prepare the HQD Glow Air pods.
Once the packaging is removed, the next step is
preparing the HQD Glow Air Pods. Each pod connects to a refill container that
holds additional liquid. This is what allows the HQD
Glow Air 70K to provide a long-lasting experience without constantly
replacing parts. Attach the refill container to the pod and push it gently
until it fits securely. You should feel it settle firmly into place. After
connecting the pieces, leave the pod for a short moment. This gives the liquid
time to soak into the coil inside the pod. Waiting a minute helps ensure that
the first puff tastes smooth and full of flavour.
 |
| HQD Glow Air 70K |
Insert the pods into the device.
Once the pods are ready, slide them into the
device. The slots inside the HQD Glow Air 70K are designed to hold the pods
firmly. Just push the pod into the slot until it sits securely. The magnetic
connection will keep it in place. Make sure the mouthpiece lines up at the top
of the device so it feels natural when you inhale. At this point most of the
setup is already done.
Turning the Device On
Some versions of the HQD Glow Air
70K include a simple power feature that prevents the device from activating
accidentally. If your device has a power button, press it a few times quickly
to turn it on. Once the indicator lights up or the screen becomes active, the
device is ready. Many users notice that the device also activates automatically
when they take a puff, which makes the process even easier.
Taking Your First Puff
Now comes the easiest part. Place the mouthpiece
between your lips and take a slow inhale. The HQD Glow Air 70K will detect the
inhale and activate automatically. There is no need to press any buttons while
using the device. The airflow sensor inside the device handles everything. A
slow, steady puff usually produces the best flavour and vapour.
Switching Between Flavours
One feature that many users enjoy about the HQD
Glow Air 70K is the ability to switch between two flavours. The device can hold
two HQD Glow Air Pods at the same time. When you feel like changing the
flavour, simply move the flavour switch on the device. This activates the
second pod and instantly changes the flavour you are vaping. It is a small
feature, but it adds a lot of variety and keeps the experience interesting
throughout the day.
Charging the Device
The HQD Glow Air 70K uses a rechargeable battery
that powers the device. When the battery level gets low, connect a charging
cable to the port located at the bottom of the device. Charging usually takes a
short amount of time, and the battery indicator will show when the device is
fully charged. Keeping the device charged helps maintain consistent performance
and flavour.
A Few Simple Tips for New Users
If this is your first time using HQD Glow Air Pods,
there are a few small habits that can make the experience better. Try to take
slow and steady puffs rather than very quick inhales. This allows the coil to
heat evenly and improves the flavour. If you install a new pod, allow it to sit
for a minute before using it so the liquid can fully soak into the coil. It
also helps to keep the device upright when possible so the liquid flows
properly inside the pod. These small things make a noticeable difference over
time.
When to Replace HQD Glow Air 70K
Pods
Eventually the liquid inside the pods will run out.
When that happens, you may notice that the flavour becomes weaker or the vapour
production decreases. That simply means the HQD Glow Air Pods need to be
replaced. Removing the pod and installing a new HQD Glow Air 70K pod only takes
a few seconds. Once the new pod is in place, the device will be ready to use
again.
Final Thoughts
The HQD Glow Air 70K might seem slightly
complicated when you first open the box, but in reality it is designed to be
very easy to use. After the pods are prepared and inserted, the device does
most of the work on its own. You simply inhale, and the device activates
automatically. With the ability to switch flavours and use HQD
Glow Air 70K Pods easily, the setup quickly becomes familiar even for
someone who has never used a pod device before. Once you have used it a couple
of times, the whole process feels effortless.
FAQs
How do I start using the HQD Glow
Air 70K for the first time?
When you open the box, take the device and pods out
and remove any small protective seals you see on the pods. After that, attach
the refill containers to the HQD Glow Air 70K Pods and slide the pods into the
device. Once they are in place, the setup is basically done. All you need to do
then is take a gentle puff from the mouthpiece and the device will start
working automatically.
Do I need to refill the HQD Glow
Air Pods myself?
No, you do not have to refill anything yourself.
The HQD Glow Air Pods are designed to work with refill containers that come
with the device. Once you connect the container to the pod, the liquid feeds
into the pod gradually while you use it. So you do not need to worry about
filling bottles or handling liquid.
How do I switch flavours on the
HQD Glow Air 70K?
Switching flavours on the HQD Glow Air 70K is very
easy. The device can hold two pods at the same time. If you feel like changing
the flavour, just use the flavour switch on the device, and it will move to the
second HQD Glow Air Pod. You can switch back whenever you want, which makes it
nice if you like changing flavours during the day.
How will I know when the HQD Glow
Air 70K Pods are finished?
You will usually notice it through the flavour.
When the HQD Glow Air 70K Pods are running out of liquid, the taste becomes
weaker and the vapour may feel lighter than usual. That is usually the sign
that it is time to replace the pod with a new one.
Is the HQD Glow Air 70K easy for
beginners to use?
Yes, it is actually quite simple once you set it up
the first time. After installing the HQD Glow Air Pods, there are no
complicated steps. The device activates when you inhale, so you do not have to
press buttons or adjust settings. For many new users, it feels straightforward
after just a few minutes of using it.
.webp)
